Mirage 1P with
door open
click for larger image

Mirage 1P
end view
click for larger image

- Lightest weight full size, freestanding shelter...
perfect for the lightweight backpacker

• Interior is connected to outer shell
• Interior is attached to outer shell so it can be quickly be set up or taken down in one piece like a single wall tent
• Extremely quick setup and take down, only a minute or so from bag to setup, including installing stakes/pegs
• Large no claustrophobic interior with 104cm (41in) high ceiling
• Lot's of no-see-um mesh for bug protection and ventilation
• Large side door(s) for easy entry and exit
• The doors on all our shelters, including the Mirage, are located a little toward the head end... they are ergonomically located to minimize excess movement getting in/out... the doors are also ergonomically sized; they are wider at the bottom to allow legs swinging in/out of shelter, with high entrance height for headroom clearance, etc.
• Big Sky's shelters have the best ergonomic design of any in the industry
• External pole clips for easy setup
• 2Door version: a total of four (4) interior pockets!!!
- Two (2) interior pockets for headlamp, knife, maps, etc.
- Two (2) clothes hampers made with breathable mesh built into shelter for storing or drying clothes
• Two (2) large vestibules - more than enough room for pack, footwear, and more!
Note: 1Door version: only one of the two vestibules has a zipper.
• 2Door version: open vents on both vestibules for cross flow ventilation.... or for even more cross flow ventilation... open both vestibules to expose full mesh side walls! Lightweight
• ultra light weight composite or light weight aluminum poles... your choice
• Ready to go out of the box... it is seam sealed where necessary at the factory before being shipped.

Note: The Mirage 1P has two vestibules, both have zippers on the 2Door version, but on the 1Door version only one of them has a zipper.

Note: Recommended for low humidity areas, such as USA's southwest and Rocky Mountain areas, and not recommended for high humidity areas

• Footprint/ground sheet(sold separately) extends your shelter life by protecting it from abrasive wear and tear. The Footprint made with the same silnylon fabric as the floor so using this doubles the floor thickness. It is much easier and less expensive to replace a worn out Footprint than the shelter floor - 15% discount with shelter purchase.

• Stakes/pegs (sold separately) - 15% discount with shelter purchase

• Guy line kits (sold separately) 4 Lite-n-Mity^TM reflective spectra guy lines and 4 stakes for creating a more storm worthy structure - 15% discount with shelter purchase

FAQ: Which is better - Evolution, Revolution, or Mirage series?
It is mostly personal preference... they all have the same interior dimensions...

• pick the Evolution if you want to remove the outer fly and only use the mesh netting body and poles; the poles attach to the inner body and the outer fly covers the body and poles...

• pick the Revolution or Mirage if you want to be leave the interior attached so it can quickly and easily be set up or taken down as a one piece shelter, which is especially nice when it is raining since rain will not get into the interior. The interior hangs from the outer shell and the poles attach to the outer shell.

• pick the Revolution if you want to remove the interior. The Mirage interior is permanently attached and can not be removed.

Since the poles attach to the outer shell on the Revolution/Mirage series the structure is stronger and more storm worthy than the Evolution series... also, the Revolution interiors can be removed to create a very storm worthy single wall shelter since the poles attach to the outer shell.

coming soon...

Mirage 1P

shelter and poles
average weight